Fujitsu ETERNUS DX60 S3 - Page 880

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
880
A.4.6.4 Set SAS Host QoS
For details about this function, refer to "4.7.9 Set SAS Host QoS" (page 492).
For the factory default settings for this function, refer to "Appendix B Set SAS Host QoS" (page 1000)
.
● SAS Host QoS Setting
• Bandwidth Limit
A.4.6.5 Set FC Port QoS
For details about this function, refer to "4.7.10 Set FC Port QoS" (page 493).
For the factory default settings for this function, refer to "Appendix B Set FC Port QoS" (page 1001)
.
● FC Port QoS Setting
• Bandwidth Limit
Refer to "FC/FCoE Host QoS Setting" (page 879) in "A.4.6.2 Set FC/FCoE Host QoS" (page 879) for details.
Description Select the maximum performance in IOPS (throughput value).
If the bandwidth limit is not to be configured (the bandwidth is not to be limited), select
"Unlimited".
Input condition/
Display contents
• Unlimited
• 27000 IOPS (1000 MB/s)
• 21000 IOPS (850 MB/s)
• 15000 IOPS (700 MB/s)
• 10020 IOPS (600 MB/s)
• 8040 IOPS (500 MB/s)
• 6000 IOPS (400 MB/s)
• 5040 IOPS (300 MB/s)
• 4020 IOPS (250 MB/s)
• 3000 IOPS (200 MB/s)
• 2040 IOPS (160 MB/s)
• 1020 IOPS (125 MB/s)
• 720 IOPS (90 MB/s)
• 480 IOPS (60 MB/s)
• 240 IOPS (30 MB/s)
• 120 IOPS (15 MB/s)