Fujitsu ETERNUS DX60 S3 - Page 881

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
881
A.4.6.6 Set iSCSI Port QoS
For details about this function, refer to "4.7.11 Set iSCSI Port QoS" (page 495).
For the factory default settings for this function, refer to "Appendix B Set iSCSI Port QoS" (page 1001)
.
● iSCSI Port QoS Setting
• Bandwidth Limit
A.4.6.7 Set SAS Port QoS
For details about this function, refer to "4.7.12 Set SAS Port QoS" (page 496).
For the factory default settings for this function, refer to "Appendix B Set SAS Port QoS" (page 1001)
.
● SAS Port QoS Setting
• Bandwidth Limit
A.4.6.8 Set FCoE Port QoS
For details about this function, refer to "4.7.13 Set FCoE Port QoS" (page 498).
For the factory default settings for this function, refer to "Appendix B Set FCoE Port QoS" (page 1001)
.
● FCoE Port QoS Setting
• Bandwidth Limit
Refer to "FC Port QoS Setting" (page 880) in "A.4.6.5 Set FC Port QoS" (page 880) for details.
Refer to "FC Port QoS Setting" (page 880) in "A.4.6.5 Set FC Port QoS" (page 880) for details.
Refer to "FC Port QoS Setting" (page 880) in "A.4.6.5 Set FC Port QoS" (page 880) for details.