Fujitsu ETERNUS DX8100 S3 - Page 184

Chapter 3 Component Status
3.24 Port Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
184
- iSCSI IPv6 Connect IP Address
The IPv6 connect IP address of the iSCSI port is displayed.
Note that the IPv6 address is displayed as an abbreviation.
If not specified, a "-" (hyphen) is displayed.
• IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
Refer to "IPv6 Address Notation" (page 253)
for details.
- iSCSI IPv6 Gateway
The gateway IPv6 address of the iSCSI port is displayed.
Note that the IPv6 address is displayed as an abbreviation.
If not specified, a "-" (hyphen) is displayed.
• IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
Refer to "IPv6 Address Notation" (page 253)
for details.
● SAS Port
The detailed SAS port information is displayed.
The following items are displayed in the Main area:
■ CM#x CA#y Port#z Information
- Location
The location information of the port is displayed.
• CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
- Status
The port status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
- Status Code
The port status code is displayed.
- Error Code
The port error code is displayed.
- Type
The type of the port (fixed to "SAS") is displayed.