Item Description Setting/Value Factory Default
When [Forcibly select Front-
Side Imprinter] or [Forcibly
select Back-Side Imprinter] is
selected, priority is given to
the Software Operation Panel
settings.
Timeout for manual
feeding
Specify the waiting time to
cancel manual feeding.
It can also be configured from
the operator panel.
5, 10, 20, 30, 40, 50, 60, 70,
80, 90, 100, 110, 120, 180,
240, 300, 360, 420, 480, 540,
600, 900, 1200, 1500, 1800,
1999 (seconds)
10 seconds
Paper Protection Specify whether to enable or
disable Paper Protection.
Enabling this setting reduces
the risk of having your
documents damaged in such
ways, by stopping the scan
when the scanner detects a
document that is unusually
warped.
Paper Protection is disabled in
Manual Feed mode.
It can also be configured from
the scanner driver's setup
dialog box or the operator
panel. Note that priority is
given to the scanner driver
setting unless you have
prioritized the operator panel
setting.
Enable / Disable Disable
Paper Protection
Sensitivity
Sensitivity Setting: you can
specify the sensitivity to detect
an abnormal feeding of
documents when Paper
Protection is enabled.
It can also be configured from
the operator panel. Note that
you can prioritize the operator
panel setting.
Low / Normal / High Normal
Detection Range: you can
specify the range to detect an
abnormal feeding of
Normal / Large Normal
Operational Settings
213
To Next Page
Loading...
