114
Chapter 4 Operations after OS Installation
4.7 LAN Driver Advanced Setup
[Intel
®
PROSet]
"Intel
®
PROSet" is a tool for configuring details on the LAN driver. It is used in the
following cases.
• When using the Teaming function between LAN cards
• When setting up a VLAN using a LAN card
• When performing advanced setup of a LAN card
The Teaming function cannot be performed between a LAN card and the onboard LAN.
In Windows Server 2008 Server Core installation environment, Intel
®
PROSet cannot be installed.
Therefore, Teaming and VLAN cannot be used in Server Core installation environment.
[Connection] and [Cable] test of the diagnostic function that is executed from the [Link speed] tab of
Intel
®
PROSet, cannot be used.
Use of BACS
Use BACS (p.98) to perform the following advanced setup of the onboard LAN:
• When using the teaming (load balance) function between onboard LANs.
• When setting up a VLAN using the onboard LAN
• When performing advanced setup of an onboard LAN
4.7.1 Intel
®
PROSet Installation
If tabs, such as [Link], [Teaming] and [VLAN], are not displayed in the LAN adapters properties that
can be selected from the [Device Manager], install Intel
®
PROSet according to the following installation
procedures:
1 Execute the following file contained in the PRIMERGY Startup Disc.
For Windows Server 2008 (64-bit)
[CD/DVD drive]:\DRIVERS\LAN\Intel\APPS\PROSETDX\Vistax64\DxSetup.exe
For Windows Server 2008 (32-bit)
[CD/DVD drive]:\DRIVERS\LAN\Intel\APPS\PROSETDX\Vista32\DxSetup.exe
For Windows Server 2003 x64
[CD/DVD drive]:\DRIVERS\LAN\Intel\APPS\PROSETDX\Winx64\DxSetup.exe
For Windows Server 2003
[CD/DVD drive]:\DRIVERS\LAN\Intel\APPS\PROSETDX\Win32\DxSetup.exe
2 Click [Next].
To Next Page
Loading...
