Fujitsu Primergy RX200 S4 - Standard IDE Submenu

180
Chapter 7 Configuring Hardware and Utilities
7.2.3 Standard IDE Submenu
This submenu appears when selecting [Standard IDE] from the [Main] menu.
Use this submenu to set the type and operating mode for connected IDE devices.
table: Items on the IDE Menu
Item Setting Description
PIO Mode PIO 4 Sets the data transfer mode.
DMA Mode UDMA 5 Sets the Direct Memory Access (DMS) data
transfer mode.
Firmware J.** Displays the firmware version.
PhoenixBIOS Setup Utility
Item Specific HelpStandard IDE: [DV-28S-V-(PS)]
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
Main
PIO Mode:
DMA Mode:
Firmware:
PIO 4
UDMA 5
J.**