Fujitsu Primergy RX200 S4 - Installable Expansion Cards and Notes

149
PRIMERGY RX200 S4 User's Guide
 PCI slot specifications
The specifications of the PCI slots are as follows:
The PCI slots conform to the PCI Local Bus Specifications, Rev. 2.2.
 SAS model
 SATA model
6.5.2 Installable Expansion Cards and Notes
This section explains expansion cards that can be installed in this server and notes on the installation.
 Installable expansion cards
 SAS model
 The SAS Ctrl is installed standardly in the slot 3.
table: The specifications of the PCI slots
PCI slot Specifications Remarks
1
PCI-Express×8
For LowProfile PCI-Express
2
PCI-Express×8
For Full Height, Half length / LowProfile PCI-Express
3
PCI-Express×4
For SAS Ctrl (installed as a standard feature) or SAS RAID Ctrl
table: The specifications of the PCI slots
PCI slot Specifications Remarks
1 PCI-Express×8 For LowProfile PCI-Express
2 PCI-Express×8 For Full Height, Half length /LowProfile PCI-Express
table: Installable expansion cards
Product name Product ID Remarks
SAS Ctrl —
Integrated Mirroring SAS, installed as a standard
feature
SAS RAID Ctrl
PG-248B
MegaRAID SAS, Cache capacity: 256MB
SAS RAID Ctrl
*1
PG-248C
MegaRAID SAS, Cache capacity: 512MB,
with BBU
SAS RAID Ctrl
*1
PG-244C1
for SX35, LowProfile, FullHeight, with BBU
SAS RAID Ctrl PG-248G1L LowProfile, Cache capacity: 512MB, with BBU
Fibre Channel Controller
PG-FC202 PCI-Express
SAS Ctrl PG-228BL for SX10 S2, LowProfile
SCSI Ctrl U320 lp
PG-2281L Ultra320SCSI, LowProfile, for optional SCSI
devices
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp
PG-2861L 1000BASE-T, LowProfile, Dual Port
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T lp
PG-289L 1000BASE-T, LowProfile