Fujitsu Primergy RX200 S4 - Page 150

150
Chapter 6 Installing Internal Options
*1: The SAS RAID Ctrl PG-248C and PG-244C1 cannot be installed at the same time.
 SATA model
 Installation location and order of expansion cards
Install each expansion card in the PCI slots in the number order described in the following table and
install them according to the installation order. Expansion cards will not operate normally unless
installed in the specified locations.
 SAS model
—: indicates that it can not be installed.
*1: The SAS RAID Ctrl PG-248C and PG-244C1 cannot be installed at the same time.
Eth. Ctrl 1x1Gbit PCI-E 1000BASE-SX lp
PG-288L 1000BASE-SX, PCI-Express
table: Installable expansion cards
Product name Product ID Remarks
SAS RAID Ctrl
PG-244C1
for SX35, LowProfile, FullHeight, with BBU
SAS RAID Ctrl PG-248G1L LowProfile, Cache capacity: 512MB, with BBU
Fibre Channel Controller
PG-FC202 PCI-Express
SAS Ctrl PG-228BL for SX10 S2, LowProfile
SCSI Ctrl U320 lp
PG-2281L Ultra320SCSI, LowProfile, for optional SCSI
devices
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp
PG-2861L 1000BASE-T, LowProfile, Dual Port
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T lp
PG-289L 1000BASE-T, LowProfile
Eth. Ctrl 1x1Gbit PCI-E 1000BASE-SX lp
PG-288L 1000BASE-SX, PCI-Express
table: Installation location/order of expansion cards
Product name (Product ID)
PCI slot Maximum
number of
installed cards
Installation
order
1 2 3
SAS Ctrl (installed as a standard feature)
——
1
1
1
3
1
SAS RAID Ctrl (PG-248B)
——
1
1
2
SAS RAID Ctrl (PG-248C)
*1
——
1
1
3
SAS RAID Ctrl (PG-244C1)
*1
—1—1
1
2
4
SAS RAID Ctrl (PG-248G1L) 2
1
—
1
5
Fibre Channel Controller (PG-FC202)
12—
16
SAS Ctrl (PG-228BL)
12—
2
2
7
SCSI Ctrl U320 lp (PG-2281L) 1 2
—2
8
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp (PG-2861L) 1 2
—
29
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T lp (PG-289L) 1 2
—
210
Eth. Ctrl 1x1Gbit PCI-E 1000BASE-SX lp (PG-288L) 1 2
—
211
table: Installable expansion cards
Product name Product ID Remarks