Fujitsu Primergy RX200 S4 - Main Menu

179
PRIMERGY RX200 S4 User's Guide
7.2.2 Main Menu
The [Main] menu is displayed initially when you start the BIOS Setup Utility.
Settings for the time and date and for the drives are configured on the [Main] menu.
table: Items on the Main Menu
Item Setting Description
System Time Present time Sets the system time in "hh:mm:ss" format. Enter
the hours in the 24-hour clock format.
For example, 6:30:00 P.M. is set as "18", "30", and
"00".
Note:
 When a higher system time accuracy is
required, apply a network-based time setting
service (such as NTP) to the system
configuration.
System Date Present date Sets the system date in "mm/dd/yyyy" format.
For example, December 5, 2008 is set as "12", "05",
and "2008".
Standard IDE Sets the type and operating mode for connected IDE devices.
"7.2.3 Standard IDE Submenu" (p.180)
Boot Options Sets system startup options.
"7.2.4 Boot Options Submenu" (p.181)
Base Memory Displays the available base memory size below 1MB.
Extended Memory Displays the memory size above 1MB.
System Time:
System Date:
Standard IDE:
Boot Options
Base Memory:
Extended Memory:
[HH:MM:SS]
[MM:DD:YYYY]
[DV-28S-V-(PS)]
640KB
***M