122
Chapter 5 High Reliability Tools
5.1 RAID Management Tool
RAID Management Tool performs configuration, initialization and monitoring of the
hard disk array. For details, refer to the manual in the Array Controller Document &
Tool CD.
OS installation using ServerStart
When the OS has been installed using ServerStart, RAID Management Tool has been also installed
together with the OS as well as other high reliability tools.
Before starting operation
Set an array administrator account for the RAID management tool (ServerView RAID).
For details, refer to the manual in the Array Controller Document & Tool CD.
Configuration of array administrator account
Set an array administrator account for the RAID management tool (ServerView RAID).
A Windows user account is required when using ServerView RAID.
Create a group named "raid-adm", and an account with any name for an array administrator within the
group, "raid-adm".
Setting the HDD check scheduler
When using the SAS RAID Ctrl (MegaRAID SAS) or an Onboard Software RAID (Embedded
MegaRAID SATA), change the settings for the HDD check scheduler according to the operation that is
required. It is set to 12:00 everyday as default.
Configuration of Battery Recalibration Scheduler
When using a SAS RAID Ctrl (MegaRAID SAS) together with a battery backup unit, change the
settings of Battery Recalibration Scheduler according to the operation that is required. The default
setting is 11:00 on the first of every month.
To Next Page
Loading...
