Fujitsu Primergy RX200 S4 User Manual

91
PRIMERGY RX200 S4 User's Guide
4.4.4 Creating Driver Disks
Obtain floppy disks as many as the drivers to be created before taking the procedures below.
Start up ServerStart and confirm that the FloppyBuilder window is displayed.
1 Click [Drivers Diskettes (for OS)].
The [FloppyBuilder Driver Disk] window appears.
2 Click the type of the driver to be created.
3 Click the driver disk to be created.
Follow the message and insert a floppy disk.
4 Perform the subsequent operations according to the messages on the
windows.
The floppy disk will be formatted automatically and file copying will start.
The driver disk is automatically created. When a message appears indicating that creating the
disk is completed, click [OK] and eject the floppy disk.
4.4.5 Creating a DOS Diskette
For DOS data stored into the floppy disk, refer to the file in the following folder of the PRIMERGY
Startup Disc.
[CD/DVD drive]:\FreeDOS
To create a DOS diskette, prepare an unused floppy disk.
Start up ServerStart and confirm that the FloppyBuilder window is displayed.
1 Start up ServerStart and Click [FloppyBuilder].
2 Click [DOS Diskette].
3 Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The DOS diskette will be created automatically. When a message appears indicating that the disk
is created, click [OK] and eject the disk.

Fujitsu Primergy RX200 S4 Specifications

General

Brand	Fujitsu
Model	Primergy RX200 S4
Category	Server
Language	English