Fujitsu Primergy RX200 S4 - How to Install an Internal DVD-ROM Unit

161
PRIMERGY RX200 S4 User's Guide
6.6.3 How to Install an Internal DVD-ROM Unit
This section explains how to install an internal DVD-ROM unit.
1 Turn off the power and all peripheral devices, and pull the server out from the
rack to remove the top cover.
"6.2 Attaching/Removing the Top Cover" (p.132)
2 Touch a metal part of the server to discharge static electricity from your body.
3 Remove the blank unit from the upper side of the CD/DVD drive bay.
1. Press the lock of the blank unit to release it.
2. Push the blank unit forward and out.
Blank unit
[Front]
Lock
(2)
(1)