Fujitsu Primergy RX200 S4 - 2.2 Selecting an Installation Method

41
PRIMERGY RX200 S4 User's Guide
2.2 Selecting an Installation Method
When install the OS with ServerStart, there are multiple installation methods. Prior to
OS installation, choose a method.
2.2.1 Supported OS
The following OS can be installed with using ServerStart V7.808.
• Microsoft
®
Windows Server
®
2008 Standard
• Microsoft
®
Windows Server
®
2008 Enterprise
• Microsoft
®
Windows Server
®
2008 Standard without Hyper-V™
• Microsoft
®
Windows Server
®
2008 Enterprise without Hyper-V™
• Microsoft
®
Windows Server
®
2003, Standard Edition
• Microsoft
®
Windows Server
®
2003, Enterprise Edition
• Microsoft
®
Windows Server
®
2003, Standard x64 Edition
• Microsoft
®
Windows Server
®
2003, Enterprise x64 Edition
• Microsoft
®
Windows Server
®
2003 R2, Standard Edition
• Microsoft
®
Windows Server
®
2003 R2, Enterprise Edition
• Microsoft
®
Windows Server
®
2003 R2, Standard x64 Edition
• Microsoft
®
Windows Server
®
2003 R2, Enterprise x64 Edition
 ServerStart does not support OS installation of Linux.
 Any of unsupported OS can not be installed.
 Windows Server 2003 Service Pack 2 can be installed.
2.2.2 Installation Modes of ServerStart
 Quick installation mode
This mode completes the OS installation by executing plain settings. Select this mode when you want to
install the OS quickly and simply.
When installing Windows Server 2008 in Quick installation mode, full installation is performed.
To install the OS while maintaining the established RAID environment, the Quick installation mode
must be selected.
Select [Logical Disk0] in the [Select the Boot Controller and Boot Disk] window and install the OS.