61
PRIMERGY RX200 S4 User's Guide
3.2.3 OS Installation Wizard
Set computer information, user information, and the network protocol.
ServerStart can configure multiple network patterns. When configuring a domain controller, refer to
"Using ServerStart to Configure the Network".
The setup windows vary depending on the OS to be installed. For example, operation on Server 2003
R2 is given below. Server 2003 R2 is corresponding to your OS to be installed.
1 Click [Installation Wizard for MS Windows Server 2003].
A message prompts you to specify the configuration file.
2 Click [No].
The [Windows Installation] window appears.
3 Enter the password in [Password for Administrator account] and [Please repeat
Password] and click [Next].
If the passwords of [Password for Administrator account] and [Please repeat Password] are
not identical, an error message occurs. Enter the password correctly.
To Next Page
Loading...
