Fujitsu Primergy RX200 S4 - PCI Status Submenu

197
PRIMERGY RX200 S4 User's Guide
7.2.15 PCI Status Submenu
This submenu appears when selecting [PCI Status] from the [Server] menu.
Use this submenu to set whether or not to allow the use of the installed expansion card.
table: Items on the PCI Status Submenu
Item Setting Description
Slot 1 OK (Unchangeable) Sets whether or not to enable the use of the
expansion cards in PCI slot 1 to 3.
If "Failed" is displayed, replace the faulty
expansion card and then change the setting to
"OK".
Slot 2
Slot 3
PhoenixBIOS Setup Utility
Item Specific HelpPCI Status
Server
Slot 1:
Slot 2:
Slot 3:
[OK]
[OK]
[OK]