35
PRIMERGY RX200 S4 User's Guide
3 Place the CD/DVD at the center of the tray.
While supporting the CD/DVD tray, push the tray until it clicks into position.
If the CD/DVD is placed improperly when the tray is pushed into the unit, the CD/DVD or the
drive may be damaged.
Be careful not to touch the lens of the CD/DVD drive.
When inserting CD/DVD, the CD/DVD access LED is turned on. After checking that the LED is
turned off, proceed with the next procedure.
4 Move the tray back.
Push the tray gently until it clicks into position.
Ejecting the CD/DVD
To eject the CD/DVD, press the CD/DVD eject button in the same way as steps 1 to 2 in " Inserting
the CD/DVD" (P. 34 )
CD/DVD tray
Label side up
CD/DVD tray
To Next Page
Loading...
