4
Entering commands (Keys)
Command entries are displayed in the following way.
• At each blank in a command line (as pointed out above), press the [Space] key once.
• When using Windows or DOS OS, commands are not case sensitive.
• CD/DVD drive names are shown as [CD/DVD drive]. Enter your drive name according to your
environment.
[CD/DVD drive]:\setup.exe
Screen shots and figures
Screen shots and figures are used as visual aids throughout this manual. Windows, screens, and file
names may vary depending on the OS, software, or configuration of the server used. Figures in this
manual may not show cables that are actually connected for convenience of explanation.
Consecutive operations
Consecutive operations are described by connecting them with "–".
Example: Procedure of clicking the [Start] button, pointing to [All programs], and clicking [Accessories]
↓
Click [Start] – [All programs (or Programs)] – [Accessories].
To Next Page
Loading...
Need help?
General