49
PRIMERGY RX200 S4 User's Guide
2 Insert the ServerStart floppy disk supplied with the server. Make sure that "on
local drive (floppy/USB stick)" and "A:" are selected and click [Continue].
Set the ServerStart floppy disk in the write-enabled state.
When installing the OS not using the ServerStart floppy disk, select [No status backup] and
click [Continue]. However, when configuring RAID using ServerStart, [No status backup] can-
not be selected.
The [Initialization of ServerStart core running] window appears and the ServerStart initialization
process starts. Depending on hardware configuration, this process may take a few minutes. After
completion, the license agreement window appears.
To Next Page
Loading...
