86
Chapter 4 Operations after OS Installation
1 Insert the PRIMERGY Startup Disc into the client computer.
The [PRIMERGY Startup Disc] window appears.
2 Click [ServerStart V7.808].
[Fujitsu Siemens ServerStart] window appears.
The massage "Do you want to run or save this file?" may appear depending the OS in use. Fol-
low as below.
1. Click [Run].
A massage appears that "The publisher could not be verified. Are you sure you want to
run this software?"
2. Click [Run].
Execute "SeStSetup.exe" in the disk when [Fujitsu ServerStart Setup] window is not
displayed.
3 Check the checkbox of [Classic] only and click [OK].
The Setup window appears.
4 Click [Next].
The [License Agreement] window appears.
5 Select [I accept the license agreement] and click [Next].
The [User Information] window appears.
To Next Page
Loading...
