Fujitsu SPARC Enterprise M3000 Service Manual

B-6 SPARC Enterprise M3000 Server Service Manual • March 2012
B.3.2 CD-RW/DVD-RW Drive Unit (DVDU)
TABLE B-6 shows CD-RW/DVD-RW drive unit specifications.
For the replacement procedure, see Chapter 11.
B.4 Power Supply Unit
The power supply unit provides the server with power received from the external
power source. The redundant configuration allows continued server operation if a
power supply unit fails.
TABLE B-7 shows the electrical specifications.
TABLE B-6 CD-RW/DVD-RW Drive Unit Specifications
Item Description
Number of CD-RW/DVD-RW drive units 1
Interface Advanced Technology Attachment Packet
Interface (ATAPI)
Location Above hard disk drive
Active replacement No
Hot replacement No
Cold replacement Yes
TABLE B-7 Electrical Specifications
Item Specifications
Frequency of
CPU
2.52 GHz 2.75 GHz/2.86 GHz
Input voltage
100 VAC to
120 VAC
200 VAC to
240 VAC
100 VAC to
120 VAC
200 VAC to
240 VAC
Number of
power cords
2 (1 for each power supply unit)
Power cord
length
3 m/9.84 ft
Cooling fan
unit
2 (1 for each power supply unit)
Redundancy
1 + 1 redundant configuration
Rated current
*
4.80 A 2.59 A 5.15 A 2.81 A

Fujitsu SPARC Enterprise M3000 Specifications

General

Brand	Fujitsu
Model	SPARC Enterprise M3000
Category	Server
Language	English