Fujitsu SPARC Enterprise M3000 Service Manual

5-8 SPARC Enterprise M3000 Server Service Manual • March 2012
5.4.2 Attaching the Fan Cover
1. Align the tab on the left end of the fan cover in the predetermined position
and then secure the fan cover in position.
2. Tighten the one screw on the right side of the fan cover.
3. Push the server back into the equipment rack.
For details, see Section 5.1.2, “Sliding the Server into the Equipment Rack” on
page 5-3.

Fujitsu SPARC Enterprise M3000 Specifications

General

Brand	Fujitsu
Model	SPARC Enterprise M3000
Category	Server
Language	English