3-10 SPARC Enterprise M3000 Server Service Manual • March 2012
3.4.2 Monitoring Output
To understand error conditions, collect monitoring output information. For the
collection of the information, use the commands shown in
TABLE 3-5.
3.4.3 Messaging Output
To understand error conditions, collect messaging output information. For the
collection of the information, use the commands shown in
TABLE 3-6.
Each error message logged by the predictive self-healing architecture has a message
ID and Web address associated with the message. From this message ID and Web
address, information on the most up-to-date corrective measures can be retrieved.
For details of predictive self-healing, see the Oracle Solaris OS documents.
TABLE 3-5 XSCF Commands for Checking Monitoring Output
Command Operand Description
showlogs(8) console Displays the console of a domain.
monitor Logs messages that are displayed in the message window.
panic Logs output to the console during a panic.
ipl Collects console data generated during the period of the power-on of a
domain to the completion of the Oracle Solaris OS start.
TABLE 3-6 Commands for Checking Messaging Output
Command Operand Description
showlogs(8) env Displays the temperature history log. The environmental temperature
data and power status are indicated in 10-minute intervals. The data is
stored for a maximum of six months.
power Displays power and reset information.
event Displays information reported to the system and stored it as event
logs.
error Displays error logs.
fmdump (1M)
fmdump(8)
Displays FMA diagnostic results and errors. This command is
provided as an Oracle Solaris OS command and XSCF Shell command.
To Next Page
Loading...
Need help?
General