Fujitsu SPARC Enterprise M3000

4-18 SPARC Enterprise M3000 Server Service Manual • March 2012
The show-devs output continued:
5. Type the probe-scsi-all command to confirm that the storage devices are
mounted.
6. Type the boot command to start the Oracle Solaris OS.
/cmp@400,0/core@0/cpu@1
/cmp@400,0/core@0/cpu@0
/openprom/client-services
/packages/obp-tftp
/packages/terminal-emulator
/packages/disk-label
/packages/deblocker
/packages/SUNW,builtin-drivers
/packages/SUNW,probe-error-handler
{0} ok
{0} ok probe-scsi-all
/pci@0,600000/pci@0/pci@0/scsi@0
MPT Version 1.05, Firmware Version 1.24.00.00
Target 0
Unit 0 Disk FUJITSU MAY2073RC 3701 143374738 Blocks, 73 GB
SASAddress 500000e0197292c2 PhyNum 0
Target 1
Unit 0 Disk FUJITSU MAY2073RC 3701 143374738 Blocks, 73 GB
SASAddress 500000e019728f22 PhyNum 1
Target 2
Unit 0 Disk FUJITSU MAY2073RC 3701 143374738 Blocks, 73 GB
SASAddress 500000e019729002 PhyNum 2
Target 3
Unit 0 Disk FUJITSU MAY2073RC 3701 143374738 Blocks, 73 GB
SASAddress 500000e019729302 PhyNum 3
Target 4
Unit 0 Removable Read Only device MATSHITADVD-RAM UJ875AS 1000
SATA device PhyNum 4
{0} ok
ok boot