Fujitsu SPARC Enterprise M3000 Service Manual

Contents ix
7.1.1 Confirmation of DIMM Information 7–3
7.1.2 Memory Mounting Conditions 7–4
7.2 Accessing the DIMMs 7–7
7.3 Removing the DIMMs 7–8
7.4 Installing the DIMMs 7–9
7.5 Reassembling the Server 7–9
8. Replacement and Installation of PCIe Cards 8–1
8.1 Accessing a PCIe Card 8–3
8.2 Removing a PCIe Card 8–4
8.3 Mounting a PCIe Card 8–5
8.4 Reassembling the Server 8–5
9. Replacement and Installation of a Hard Disk Drive (HDD) 9–1
9.1 Accessing a Hard Disk Drive 9–3
9.1.1 Active Replacement 9–3
9.1.2 Hot Replacement 9–3
9.1.3 Cold Replacement 9–4
9.2 Removing a Hard Disk Drive 9–4
9.3 Installing a Hard Disk Drive 9–6
9.4 Reassembling the Server 9–6
9.4.1 Active Replacement 9–6
9.4.2 Hot Replacement 9–7
9.4.3 Cold Replacement 9–7
10. Replacing the Hard Disk Drive Backplane 10–1
10.1 Accessing the Hard Disk Drive Backplane 10–2
10.2 Removing the Hard Disk Drive Backplane 10–3
10.3 Mounting the Hard Disk Drive Backplane 10–5
10.4 Reassembling the Server 10–6

Fujitsu SPARC Enterprise M3000 Specifications

General

Brand	Fujitsu
Model	SPARC Enterprise M3000
Category	Server
Language	English