2-58 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
2. Use the setad(8) command to enable or disable the strictcertmode.
3. Use the showad(8) command to confirm the strictcertmode status.
If strictcertmode is enabled, the server's certificate must have already been uploaded
to the XSCF.
<Example1> Enable the strictcertmode.
XSCF> setad strictcertmode enable
<Example2> Disable the strictcertmode.
XSCF> setad strictcertmode disable
XSCF> showad
dnslocatormode: enabled
expsearchmode: enabled
state: enabled
strictcertmode: enabled
timeout: 4
logdetail: none
To Next Page
Loading...
