Fujitsu SPARC EnterpriseM3000

Chapter 2 Setting Up XSCF 2-57
Enabling or Disabling the Expanded Search Mode
■ Command operation
1. Use the showad(8) command to display the expanded search mode status.
2. Use the setad(8) command to enable or disable the expanded search mode.
3. Use the showad(8) command to confirm the expanded search mode status.
Enabling or Disabling the Strictcert Mode
■ Command operation
1. Use the showad(8) command to display the strictcert mode status.
XSCF> showad
dnslocatormode: enabled
expsearchmode: disabled
state: enabled
strictcertmode: disabled
timeout: 4
logdetail: none
<Example1> Enable the expanded search mode.
XSCF> setad expsearchmode enable
<Example2> Disable the expanded search mode.
XSCF> setad expsearchmode disable
XSCF> showad
dnslocatormode: enabled
expsearchmode: enabled
state: enabled
strictcertmode: disabled
timeout: 4
logdetail: none
XSCF> showad
dnslocatormode: enabled
expsearchmode: enabled
state: enabled
strictcertmode: disabled
timeout: 4
logdetail: none