Chapter 2 Setting Up XSCF 2-65
2. Use the setad(8) command to set group name and privileges.
<Example1> Sets administrator group 1.
XSCF> setad group administrator -i 1 name CN=SpSuperAdmin,OU=
Groups,DC=davidc,DC=example,DC=aCompany,DC=com
<Example2> Sets operator group 1.
XSCF> setad group operator -i 1 name CN=OpGroup1,OU=SCFTEST,DC=
aplle,DC=local
<Example3> Sets custom group 1.
XSCF> setad group custom -i 1 name CN=CtmGroup1,OU=SCFTEST,DC=
aplle,DC=local
<Example4> Sets privileges for custom group 1.
XSCF> setad group custom -i 1 roles platadm,platop
To Next Page
Loading...
