Fujitsu SPARC EnterpriseM3000

2-84 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
Setting a user domain
■ Command operation
1. Use the showldapssl(8) command to display user domains.
2. Use the setldapssl(8) command to set the user domain.
3. Use the showldapssl(8) command to confirm the user domain.
Setting default roles
■ Command operation
1. Use the showldapssl(8) command to display default roles.
2. Use the setldapssl(8) command to set default roles.
XSCF> showldapssl userdomain
domain 1: (none)
domain 2: (none)
domain 3: (none)
domain 4: (none)
domain 5: (none)
<Example1> Set the user domain 1.
XSCF> setldapssl userdomain -i 1 ‘@davidc.example2.aCompany.com’
<Example2> Set the user domain 2.
XSCF> setldapssl userdomain -i 2 ‘CN=<USERNAME>,CN=Users,DC=
davidc,DC=example2,DC=aCompany,DC=com’
XSCF> showldapssl userdomain
domain 1: <USERNAME>@davidc.example2.aCompany.com
domain 2: CN=<USERNAME>,CN=Users,DC=davidc,DC=example2,DC=
aCompany,DC=com
domain 3: (none)
domain 4: (none)
domain 5: (none)
XSCF> showldapssl defaultrole
Default role: (none)
XSCF> setldapssl defaultrole platadm platop