Fujitsu SPARC EnterpriseM3000 User Manual

2-128 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
Note – For the types of logs that can be saved, see Chapter 8.
Note – When you set neither a defined value nor a value outside the specified
range, an error is displayed. In this event, no setting is made and the process is
terminated.
Password Sets a password used for ssh login to the
archive host.
setarchiving The password is used for
the ssh login.
Host public
key
Sets a public key used in server authentication
for the archive host.
The public key is specified in any of the
following ways:
•Not specified
• Specifying a key by downloading it from the
archive host
• Using text to specify a public key for the
archive host
setarchiving • To specify a public key,
use RSA. An MD5 key
is displayed for a
fingerprint.
• If a public key is set but
not used for this
authentication, the
public key is deleted.
Capacity Sets limits for the space consumed by archives.
There are two limits, one for each category of
logs:
• Audit log
•Other logs
setarchiving Specify integer values in
units of megabytes for the
capacity in order,
beginning with the audit
log and then other logs
(Note 1).
The ranges for this setting
are as follows (Note 2):
• Audit log:
0 or unlimited,
500-50000
•Other logs:
500-50000
TABLE 2-19 Log Archiving Administration (Continued)
Item Description Shell Command Remarks

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English