Chapter 2 Setting Up XSCF 2-135
Note – (1) A user name, authentication password, and encryption password that are
common to both the sending and receiving sides are set for an SNMPv3 user.
Note – (2) If inform is specified, InformRequest is sent using the SNMPv2c agent.
USM
management
information
Sets USM management information for the
following for the SNMP agent:
• Specifying a user authentication algorithm
• Sets authentication/encryption passwords
for users
• Changing authentication/encryption
-passwords for users
•Copying a user
• Deleting a user
setsnmpusm • SNMPv3 settings.
•Specify the password
over 8 characters.
Display VACM
management
information
Displays VACM management information
for the SNMP agent
showsnmpvacm
VACM
management
information
Sets VACM management information for the
following for the SNMP agent: Making
access control group and access control view
(MIB view) settings for a user
• Adds a user account to an access control
group
• Deleting a user from an access control
group
• Creating an MIB access control view
• Deleting an MIB access control view
• Providing an MIB access control view to a
group
• Deleting a group from all MIB access
control views
setsnmpvacm • SNMPv3 settings.
• Any access control view
that is provided to a
group is a Read-Only
view.
TABLE 2-21 SNMP Administration (Continued)
Item Description Shell Command Remarks
To Next Page
Loading...
