1-22 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
Caution – IMPORTANT – To use the function as explained previously, you must
create your XSCF account. Create your account before you start using the XSCF
functionality. In addition, create an account for your field engineer (FE) with the
privilege of fieldeng during initial setup.
To use these XSCF interfaces, users need to log in to XSCF with an XSCF user
account, and then enter a password. When a user successfully logs into XSCF but the
user leaves the session without any activity for a specified length of time, XSCF
automatically logs the user out. XSCF monitors user operations and keeps a detailed
access record containing the names of users who logged in and login times. For
details on the user privilege required for control of this access record, see
Section 1.4.1, “User Accounts and User Privileges” on page 1-23.
For details on login, see Chapter 5. For details on authentication and Web functions,
see Chapter 9. For details on user account registration and mail function settings, see
Chapter 2.
TABLE 1-6 outlines XSCF Functions and Connection Ports.
TABLE 1-6 XSCF Functions and Connection Ports
Functions Contents Serial port
XSCF-LAN
Ethernet
XSCF Shell • Monitors the server
The status of the system can be checked.
• System power can be controlled from a remote location
The system power can be turned on and off and the system can
be rebooted from a remote location.
• Displays the server configuration
The internal configuration of the server can be checked.
• Set up the server
Many server settings can be set.
• Supports system maintenance
Issues instructions for firmware update operation and
component replacement.
• OS console function
You can access to the OS console and/or OpenBoot PROM
prompt.
SS
To Next Page
Loading...
Need help?
General