2. SYSTEM INITIALIZATION
2-19
Automatically printing EGC messages
You can turn on/off automatic printing of FleetNET
TM
, SafetyNET
TM
(Routine) and
SafetyNET
TM
(Safety) messages. Distress and emergency SafetyNET
TM
(Safety)
messages are automatically printed regardless of printing setting.
1. Press the [F8] key to display the Setup menu.
2. Press the [6] key to display the Auto mode setup menu.
3. Press the [↓] key to choose Auto EGC Message Print and then press the
[Enter] key.
Auto Mode Setup
Auto EGC Message Print
System OFF
FleetNET OFF
SafetyNET (Routine) OFF
SafetyNET (Safety) OFF
Auto EGC message print menu
4. Press the [↓] or [↑] key to choose message type and then press the [Enter]
key.
5. Choose ON or OFF as appropriate and press the [Enter] key to close the
window.
Note: When SafetyNET (Safety) is turned off, SafetyNET
(Safety) on the
Auto EGC Message Save menu is automatically turned on.
6. Press the [Esc] key three times to return to the standby display.
To Next Page
Loading...
