EasyManua.ls Logo

Furuno NAVpilot-711C - Page 38

Furuno NAVpilot-711C
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. STEERING MODES
2-14
4. Push the Course control knob to start the turn.
The message “Start to turn by fishing mode“ appears, then your boat starts the
turn selected.
Note: The orbit and spiral turns require that the speed of the boat be less than 10
kn. If the speed is higher, the message "Too fast to go fishing mode." appears.
Reduce boat's speed to less than 10 kn.
During the turn, the ship mark, which indicates own ship’s course movement, appears
on the turn display. The ship mark does not show accurate ship’s movement. To quit
the turn, press the key.
After the turn is completed, the message "Turn ended." appears.
Circle turn
Orbit turn
The rate of turn
See section 2.6.3.
Ship markShip mark
Ship mark
Ship mark
Radius
See section 2.6.3.
Radius
See section 2.6.3.

Table of Contents

Other manuals for Furuno NAVpilot-711C

Related product manuals