30 GPSMAP
®
700 Series Owner’s Manual
Navigation
2. Select a waypoint.
3. Select
Edit Waypoint.
4. Complete an action:
Select Name. Change the name. Select Done.
Select Symbol. Select a new symbol.
Select Depth. Change the depth. Select Done.
Select Water Temp. Change the water temperature. Select Done.
Select Comment. Change the comment. Select Done.
Moving a Saved Waypoint
1. From the Home screen, select Information > User Data > Waypoints List.
2. Select a waypoint.
3. Select
Edit Waypoint > Position.
4. Indicate a new location for the waypoint:
Select Use Chart to move the waypoint while viewing a chart. Touch a new location on the
chart. Select Move Waypoint.
Select Enter Coordinates and move the waypoint. Select Done.
Deleting a Waypoint or an MOB
You can delete a waypoint or an MOB that has been saved.
1. From the Home screen, select
Information > User Data > Waypoints List.
2. Select a waypoint or an MOB.
3. Select
Delete.
Deleting All Waypoints
From the Home screen, select Information > User Data > Clear User Data > Waypoints > All.
Copying Waypoints
See “Chartplotter Data Management” (page 58).
Routes
You can create and save up to 100 routes. Each route can contain up to 250 waypoints.
Creating and Navigating a Route from Your Present Location
You can create and immediately navigate a route on the Navigation chart or the Fishing chart. When
you have reached the destination, you can choose to save the route.
NOTE
: The Fishing chart is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select
Chart.
2. Select
Navigation Chart or Fishing Chart.
•
•
•
•
•
•
•
To Next Page
Loading...
