Garmin GPSMAP 700 - Waypoints and Routes on the Radar Screen

66 GPSMAP
®
700 Series Owner’s Manual
Radar
Measuring the Range and Bearing to a Target Object
You must show the VRM and the EBL before you can adjust them (page 65).
The VRM and the EBL congured for one mode are applied to all other radar modes.
1. From the Home screen, select
Radar.
2. Select
Cruising, Harbor or Offshore.
3. Select
Menu > Adjust VRM/EBL > Move VRM/EBL.
4. Touch the target location.
The range and the bearing to the target location appear in the upper-left corner of the screen.
5. Select
Done.
Hiding the VRM and the EBL
1. From the Home screen, select Radar.
2. Select
Cruising, Harbor or Offshore.
3. Select
Menu> Adjust VRM/EBL > Hide VRM/EBL.
Measuring the Range and Bearing to a Target Object while VRM and EBL are Hidden
If you have hidden VRM and EBL (page 66), you can quickly display the range and bearing to a
location by touching the screen.
1. From the Home screen, select
Radar.
2. Select
Cruising, Harbor or Offshore.
3. Touch a location on the screen.
4. Select
Drop VRM/EBL.
Waypoints and Routes on the Radar Screen
Marking a Waypoint on the Radar Screen
1. From the Home screen, select Radar.
2. Select a radar mode.
3. Touch a location.
4. Select
Create Waypoint.
Showing Waypoints on the Radar Screen
You can show waypoints that are within the range shown on the Radar screen.
1. From the Home screen, select
Radar > Radar Setup > Appearance > Waypoints.
2. Complete an action:
Select Show to show all waypoints.
Select Navigation Only to show only waypoints associated with the currently active route.
Hiding Waypoints on the Radar Screen
You can show waypoints that are within the range shown on the Radar screen.
1. From the Home screen, select
Radar > Radar Setup > Appearance > Waypoints.
2. Select
Hide.
•
•