Garmin GPSMAP 700 - Radar; Transmitting Radar Signals

GPSMAP
®
700 Series Owner’s Manual 59
Device Conguration
Copying Built-in Maps to a Memory Card
You can copy maps from the chartplotter to a memory card for use with HomePort.
1. Insert a memory card into the SD card slot on the chartplotter.
2. From the Home screen, select
Information > User Data > Data Transfer > Card.
3. Select
Copy Built-In Map to copy the maps loaded onto your chartplotter to the memory card.
Copying Waypoints, Routes, and Tracks to or from all Chartplotters on a
NMEA 2000 Network
You can transfer information for waypoints, routes, and tracks from one chartplotter connected to a
NMEA 2000 network to every other chartplotter connected to the network. The transfer may take a
long time, depending on the number waypoints being transferred.
1. From the Home screen, select
Information > User Data > Data Transfer > NMEA 2000.
2. Complete an action:
Select Clone User Data to transfer data from the chartplotter to the other chartplotters
connected to the network. Existing data is overwritten on those chartplotters.
Select Merge User Data to transfer data between all the chartplotters connected to the
network. Unique data is combined with existing data on every chartplotter.
Backing Up Data to a Computer
1. Insert a memory card into the SD card slot on the chartplotter.
2. From the Home screen, select
Information > User Data > Data Transfer > Card > Save to
Card.
3. Complete one of the following actions to indicate the name of the le to be backed up:
Select a le name from the list.
Select Add New File to create a new le. Enter the le name. Select Done.
4. Select
Save To Card.
The le name is saved with a .ADM extension.
5. Remove the memory card from the chartplotter and insert it into an SD card reader attached to a
computer.
6. From Windows
®
Explorer, open the Garmin\UserData folder on the memory card.
7. Copy the backup le on the card and paste it to any location on the computer.
Restoring Backup Data to a Chartplotter
1. Insert a memory card into an SD card reader that is attached to the computer.
2. Copy a backup le from the computer to the memory card, into a folder named Garmin\UserData.
3. Insert the memory card into the SD card slot on the chartplotter.
4. From the Home screen, select
Information > User Data > Data Transfer > Card > Replace
From Card.
•
•
•
•