Garmin GPSMAP 700 - Bluechart G2 Vision

GPSMAP
®
700 Series Owner’s Manual 17
Charts and 3D Chart Views
Selecting a Lane Width
You can indicate the width of the navigation lane appearing in Perspective 3D or Mariner’s Eye 3D.
NOTE
: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select
Charts.
2. Select
Perspective 3D or Mariner’s Eye 3D.
3. Select
Menu > Chart Appearance > Lane Width.
4. Enter the width.
5. Select
Done.
Showing Other Vessels
See “Conguring the Appearance of Other Vessels” (page 55).
Showing and Conguring Data Overlay
See “Overlay Numbers” (page 53).
Using Waypoints and Tracks
See “Waypoints” (page 29) or “Tracks” (page 33).
BlueChart g2 Vision
An optional, preprogrammed BlueChart g2 Vision data card allows you to get the most out of your
chartplotter. In addition to detailed marine charting, BlueChart g2 Vision has the following features:
Mariner’s Eye 3D—provides a view from above and behind the boat for a three-dimensional
navigation aid. The BlueChart g2 Vision Mariner’s Eye 3D is more detailed than the pre-loaded
data (page 18).
Fish Eye 3D—provides an underwater, three-dimensional view that visually represents the
sea oor according to the information on the chart (page 20).
Fishing Charts—shows the chart with enhanced bottom contours and without navigational data.
This chart works well for offshore deep-sea shing (page 20).
High Resolution Satellite Imagery—provides high-resolution satellite images for a realistic
view of the land and water on the Navigation chart, (page 21).
Aerial Photos—shows marinas and other navigationally signicant aerial photos to help you
visualize your surroundings (page 22).
Detailed Roads and POI data—shows roads, restaurants, and other points of interest (POIs)
along the shore (page 23).
Auto Guidance—uses specied safe depth, safe height, and chart data to determine the best
course to your destination (page 23).
BlueChart g2 Vision Data Cards
NOTICE
BlueChart g2 Vision data cards are not waterproof. When you are not using the card, keep it in
the original packaging for safekeeping and store it away from exposure to sun and rain to prevent
damage to the card.
BlueChart g2 Vision data cards are susceptible to damage from static electricity. In low-humidity
environments, you should ground yourself on a large metal object before handling the card to
prevent damage to the card.
•
•
•
•
•
•
•