Garmin GPSMAP 700 - Display Configuration; Navigation Preferences

GPSMAP
®
700 Series Owner’s Manual 49
Device Conguration
Display Conguration
Setting the Sound
You can set when the chartplotter makes audible sounds.
1. From the Home screen, select
Congure > System > Beeper/Display > Beeper.
2. Complete an action:
Select Alarms Only to have the chartplotter beep only when alarms are triggered (default).
Select On (Touch and Alarms) to have the chartplotter beep when the screen is touched and
when alarms are triggered.
Setting the Language
You can select the language that appears on the chartplotter.
1. From the Home screen, select
Congure > System > Language.
2. Select a language.
Navigation Preferences
Route Settings
Selecting a Route Label Type
You can select the type of labels shown with route turns on the map.
1. From the Home screen, select
Congure > Navigation > Route Labels.
2. Complete an action:
Select Show Name to identify route turns using waypoint names.
Select Show Number to identify route turns using numbers, such as Turn 1 and Turn 2.
Conguring Route Turn Transitions
You can set how much time, or how far, before a turn in a route that you transition to the next leg.
Raising this value can help improve the accuracy of the autopilot when navigating a route or an Auto
Guidance line with many frequent turns, or at higher speeds. For straighter routes or slower speeds,
lowering this value can improve autopilot accuracy.
1. From the Home screen, select
Congure > Navigation > Turn Transition Activation.
2. Complete an action:
Select Time > Turn Transition Time. Enter the time.
Select Distance > Turn Transition Distance. Enter the distance.
3. Select
Done.
•
•
•
•
•
•