Garmin GPSMAP 700 - Individual Routine Calls; Appendix; Specifications

88 GPSMAP
®
700 Series Owner’s Manual
Digital Selective Calling
Showing the Trail Line for a Tracked Vessel
You can show the trail line for a specic tracked vessel.
NOTE
: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2
Vision data card.
1. From the Home screen, select
Charts.
2. Select
Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s Eye 3D.
3. Select
Menu > Other Vessels > DSC List.
4. Select a vessel.
5. Select
Edit > Trail > Show.
Changing the Appearance of a Trail Line
You can change the appearance of a trail line for a specic tracked vessel.
NOTE
: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2
Vision data card.
1. From the Home screen, select
Charts.
2. Select
Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s Eye 3D.
3. Select
Menu > Other Vessels > DSC > DSC List.
4. Select a vessel.
5. Select
Review > Edit > Trail Line.
6. Select a color for the trail line.
Individual Routine Calls
When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio,
you can use the chartplotter interface to set up an individual routine call. When setting up an
individual routine call from your chartplotter, you can select the DSC channel on which you want to
communicate (page 88). The radio transmits this request with your call.
Selecting a DSC Channel
NOTE: The selection of a DSC channel is limited to those channels that are available in all
frequency bands: 6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77. The default channel is 72.
If you select a different channel, the chartplotter uses that channel for subsequent calls until you call
using another channel.
1. From the Home screen, select
Information > Other Vessels > DSC List.
2. Select a vessel or a station to call.
3. Select
Call with Radio > Channel.
4. Select a channel.