EasyManua.ls Logo

Garmin GPSMAP 700 - Optimizing the Radar Display

Garmin GPSMAP 700
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GPSMAP
®
700 Series Owner’s Manual 67
Radar
Navigating a Saved Route on the Radar Screen
Before you can browse a list of routes and navigate to one of them, you must record and save at least
one route (page 30). Navigation lines must be showing in order to view a route on the Radar screen
(page 74).
1. From the Home screen, select
Where To? > Routes.
2. Select a route.
3. Select
Navigate To.
4. Complete an action:
Select Forward to navigate the route from the starting point used when the route was created.
Select Backward to navigate the route from the destination point used when the route was
created.
5. From the Home screen, select
Radar.
6. Select
Cruising, Harbor, Offshore, or Sentry.
The route appears as a purple line, with the starting point, the destination, and turns indicated.
7. Review the course indicated by the purple line.
8. Follow the purple line along each leg in the route, steering to avoid land, shallow water, and other
obstacles.
Navigating Parallel to a Saved Route on the Radar Screen
Before you can browse a list of routes and navigate to one of them, you must record and save at least
one route (page 30). Navigation lines must be showing in order to view a route on the Radar screen
(page 74).
1. From the Home screen, select
Where To? > Routes.
2. Select a route.
3. Select
Navigate To > Offset.
4. Complete an action:
Select Forward - Port to navigate the route from the starting point used when the route was
created, to the left of the original route.
Select Forward - Starboard to navigate the route from the starting point used when the route
was created, to the right of the original route.
Select Backward - Port to navigate the route from the destination point used when the route
was created, to the left of the original route.
Select Backward - Starboard to navigate the route from the destination point used when the
route was created, to the right of the original route.
5. Enter the offset distance.
6. Select
Done.
7. From the Home screen, select
Radar.
8. Select
Cruising, Harbor, Offshore, or Sentry.
The route appears as a purple line, with the starting point, the destination, and turns indicated.
9. Review the course indicated by the purple line.
10. Follow the purple line along each leg in the route, steering to avoid land, shallow water, and other
obstacles.

Table of Contents

Related product manuals