To Next Page

To Previous Page

GERAFT LOGIQ P9/P7

IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL

3-24 Section 3-7 - Completing the Set Up

5) Startup GE

NOTE: Startup GE Healthcare wallpaper with progress bar may differ depending on product type and release.

6) The software initiates and sets up the Front-End electronics and the rest of the scanner

(incl. the clicking sound of the relays on the PIL board).

7) The Keyboard backlight is lit.

8) As soon as the software has been loaded, the 2D screen is displayed on the monitor.

Important Precautions3
Chapter 141
Introduction41
- Section 1-1 Overview41
- Section 1-2 Important Conventions43
- Section 1-3 Safety Considerations48
- Section 1-4 Electromagnetic Compatibility (EMC)56
- Section 1-5 Customer Assistance57
  - 1-5-1 Contact Information57
  - 1-5-2 System Manufacturer57
Chapter 259
Site Preparation59
- Section 2-1 Overview59
  - 2-1-1 Purpose of Chapter 259
- Section 2-2 General Console Requirements60
- Section 2-3 Facility Needs65
Chapter 369
Setup Instructions69
- Section 3-1 Overview69
  - 3-1-1 The Purpose of Chapter 369
- Section 3-2 Set Up Reminders70
- Section 3-3 Receiving and Unpacking the Equipment73
- Section 3-4 Packing materials - recycling information76
- Section 3-5 Preparing for Set Up77
  - 3-5-1 Verify Customer Order77
  - 3-5-2 EMI Protection78
- Section 3-6 Connection of Auxiliary Devices79
- Section 3-7 Completing the Set Up88
- Section 3-8 Printer Installation100
- Section 3-9 System Configuration110
  - 3-9-1 System/General Preset Menu110
  - 3-9-2 External I/O Connectors114
- Section 3-10 Available Probes115
  - 3-10-1 Supported probes115
    - 3-10-1-1 Probe Naming Conventions115
    - 3-10-1-2 Probe Description115
- Section 3-11 Software/Option Configuration121
- Section 3-12 Connectivity Setup122
- Section 3-13 Configuring Connectivity126
- Section 3-14 Agent Configuration (R3 only)133
  - 3-14-1 Agent Configuration (R3 only)133
- Section 3-15 Connectivity Setup Worksheet138
- Section 3-16 Paperwork140
  - 3-16-1 Product Locator Installation140
  - 3-16-2 User Manual(s)140
Chapter 4141
Functional Checks141
- Section 4-1 Overview141
  - 4-1-1 Purpose of Chapter 4141
- Section 4-2 Required Equipment141
- Section 4-3 General Procedure143
- Section 4-4 Board Diagnostics182
Chapter 5185
Components and Functions (Theory)185
- Section 5-1 Overview185
  - 5-1-1 Purpose of Chapter 5185
- Section 5-2 General Information186
- Section 5-3 Power ON Sequence196
- Section 5-4 Software Options197
  - 5-4-1 Options197
  - 5-4-2 Smart Devices Applications (LOGIQ Apps)200
- Section 5-5 Hardware Options201
  - 5-5-1 Options201
- Section 5-6 Regional and Peripheral Options203
  - 5-6-1 Regional Options203
  - 5-6-2 Peripheral Options203
- Section 5-7 Mechanical Descriptions204
- Section 5-8 Exiting to Windows Desktop206
  - 5-8-1 Exiting to Windows Desktop206
- Section 5-9 Service Platform208
  - 5-9-1 Introduction208
  - 5-9-2 Access / Security208
    - 5-9-2-1 Local Access208
    - 5-9-2-2 How the Customer enables/disables Disruptive Mode and VCO209
- Section 5-10 Common Service Desktop (CSD) (R1, R2, R2.5 only)210
- Section 5-11 Common Service Desktop (R3 only)220
Chapter 6287
Service Adjustments287
- Section 6-1 Overview287
  - 6-1-1 Purpose of Chapter 6287
- Section 6-2 Regulatory287
- Section 6-3 LCD Monitor Adjustment288
Chapter 7295
Diagnostics/Troubleshooting295
- Section 7-1 Overview295
  - 7-1-1 Purpose of Chapter 7295
  - 7-1-2 Overview295
- Section 7-2 Collect Vital System Information296
- Section 7-3 Check Points Voltages301
  - 7-3-1 LED for Power Status301
- Section 7-4 Screen Captures and Logs302
- Section 7-5 Remote Access to Service Platform309
- Section 7-6 Minimum Configuration to Boot/Scan313
- Section 7-7 Troubleshooting Trees, Instructions and Tech Tips314
Chapter 8327
Replacement Procedures327
- Section 8-1 Overview327
  - 8-1-1 Purpose of Chapter 8327
  - 8-1-2 Returning/Shipping System, Probes and Repair Parts330
- Section 8-2 Warnings and important information331
  - 8-2-1 Purpose of this section331
  - 8-2-2 Warnings331
  - 8-2-3 Returning/Shipping Probes and Repair Parts332
- Section 8-3 System Software - Installation/Upgrade Procedure333
  - 8-3-1 Introduction333
  - 8-3-2 Manpower333
  - 8-3-3 Tools333
  - 8-3-4 Preparations333
  - 8-3-5 Preparation333
    - 8-3-5-1 General Notes on LOGIS P7/P9 Software Loading333
    - 8-3-5-2 Preparation for Software Loading335
  - 8-3-6 System Software - Installation Procedure351
  - 8-3-7 Software Installation from DVD352
  - 8-3-8 Software Installation from Common Service Desktop (R1.x.x or R2.x.x)374
    - 8-3-8-1 Involking Software Reload374
  - 8-3-9 Software Installation from Common Service Desktop (R3.x.x)377
  - 8-3-10 System Setup Procedure to display the messages in Japanese/Chinese378
- Section 8-4 Software and Functional Checks after Installation Procedure382
  - 8-4-1 Functional Check382
- Section 8-5 Settings - Backup and Restore383
  - 8-5-1 General Information384
    - 8-5-1-1 Supported Media384
    - 8-5-1-2 General Notes384
  - 8-5-2 Backup Procedures384
  - 8-5-3 Restore Procedures385
  - 8-5-4 EZBackup and EZMove385
    - 8-5-4-1 EZBackup and EZMove385
    - 8-5-4-2 To review EZBackup and EZMove386
  - 8-5-5 Option Keys387
- Section 8-6 Replacement of Front Cover388
  - 8-6-1 Manpower388
  - 8-6-2 Tools388
  - 8-6-3 Removal Procedure388
  - 8-6-4 Installation Procedure389
  - 8-6-5 Functional Check389
- Section 8-7 Replacement of Top Cover390
  - 8-7-1 Manpower390
  - 8-7-2 Tools390
  - 8-7-3 Removal Procedure390
  - 8-7-4 Installation Procedure391
  - 8-7-5 Functional Check391
- Section 8-8 Replacement of Side Cover392
  - 8-8-1 Manpower392
  - 8-8-2 Tools392
  - 8-8-3 Removal Procedure392
    - 8-8-3-1 Removal Procedure - Side Cover (L)392
    - 8-8-3-2 Removal Procedure - Side Cover (R)394
  - 8-8-4 Installation Procedure395
  - 8-8-5 Functional Check395
- Section 8-9 Replacement of Rear Cover396
  - 8-9-1 Manpower396
  - 8-9-2 Tools396
  - 8-9-3 Removal Procedure396
  - 8-9-4 Installation Procedure396
  - 8-9-5 Functional Check396
- Section 8-10 Replacement of Side Tray & Foot Rest Cover397
  - 8-10-1 Manpower397
  - 8-10-2 Tools397
  - 8-10-3 Removal Procedure397
    - 8-10-3-1 Removal Procedure - Side Tray.397
    - 8-10-3-2 Removal Procedure - Foot Rest Cover398
  - 8-10-4 Installation Procedure398
- Section 8-11 Replacement of Monitor and LCD Arm Plastic Covers399
  - 8-11-1 Manpower399
  - 8-11-2 Tools399
  - 8-11-3 Preparations399
  - 8-11-4 Monitor Remove Procedure399
  - 8-11-5 Monitor Installation Procedure401
  - 8-11-6 LCD Arm Plastic Covers Remove Procedure402
  - 8-11-7 LCD Arm Plastic Covers Installation Procedure403
- Section 8-12 Replacement of Monitor Covers404
  - 8-12-1 Manpower404
  - 8-12-2 Tools404
  - 8-12-3 Pre-Work404
  - 8-12-4 Removal Procedure404
  - 8-12-5 Installation Procedure405
  - 8-12-6 Functional Check405
- Section 8-13 Replacement of Fixed Arm Cover and Fixed Arm Holder Grip406
  - 8-13-1 Manpower406
  - 8-13-2 Tools406
  - 8-13-3 Removal Procedure406
    - 8-13-3-1 Removal Procedure - Fixed Arm Cover406
    - 8-13-3-2 Removal Procedure - Fixed Arm Holder Grip406
  - 8-13-4 Installation Procedure407
  - 8-13-5 Functional Check407
- Section 8-14 Replacement of OPIO and Related Parts408
  - 8-14-1 Manpower408
  - 8-14-2 Tools408
  - 8-14-3 Removal Procedure408
  - 8-14-4 Installation Procedure420
  - 8-14-5 Functional Check421
- Section 8-15 Replacement of the Caps for Hardkeys422
  - 8-15-1 Manpower422
  - 8-15-2 Tools422
  - 8-15-3 Removal Procedure422
  - 8-15-4 Installation Procedure422
  - 8-15-5 Functional Check423
- Section 8-16 Replacement of Key Caps (by special native language keys)424
  - 8-16-1 Manpower424
  - 8-16-2 Tools424
  - 8-16-3 Preparations424
  - 8-16-4 Removal Procedure424
  - 8-16-5 Installation Procedure425
  - 8-16-6 Replacement Checking Procedure425
  - 8-16-7 Functional Check426
- Section 8-17 Replacement around Nest Box427
  - 8-17-1 Manpower427
  - 8-17-2 Tools427
  - 8-17-3 Pre-Work427
  - 8-17-4 Nest Box Access427
  - 8-17-5 Removal Procedure - Nest Box429
  - 8-17-6 Installation Procedure - Nest Box.430
  - 8-17-7 Removal Procedure - Board Assy in Nest Box431
  - 8-17-8 Removal Procedure - Separating MPI and MCB433
  - 8-17-9 Removal Procedure - Separating DCWD Board(Option) from MPI434
  - 8-17-10 Separating MDC assy from MCB assy435
  - 8-17-11 Handling EEPROM on MCB Board436
  - 8-17-12 Separating MCB assy from Brackets and COM Express437
  - 8-17-13 Separating DC4D Unit from IO BOX439
  - 8-17-14 Separating Battery Unit from IO BOX440
  - 8-17-15 Separating HDD441
  - 8-17-16 Separating COM Express442
  - 8-17-17 Installation Procedure - MPI, MCB, MDC, DC4D, HDD, Battery and COM Express443
  - 8-17-18 Functional Check - MPI, MCB, MDC, IO Box443
  - 8-17-19 Removal Procedure - MBP assy443
  - 8-17-20 Installation Procedure - MBP assy443
  - 8-17-21 Functional Check443
- Section 8-18 Replacement of Front fan444
  - 8-18-1 Manpower444
  - 8-18-2 Tools444
  - 8-18-3 Removal Procedure444
  - 8-18-4 Installation Procedure444
  - 8-18-5 Functional Check444
- Section 8-19 Replacement of Bottom fan445
  - 8-19-1 Manpower445
  - 8-19-2 Tools445
  - 8-19-3 Removal Procedure445
  - 8-19-4 Installation Procedure447
  - 8-19-5 Functional Check447
- Section 8-20 Replacement of Rear Handle448
  - 8-20-1 Manpower448
  - 8-20-2 Tools448
  - 8-20-3 Removal Procedure448
  - 8-20-4 Installation Procedure448
  - 8-20-5 Functional Check448
- Section 8-21 Replacement of Link Arm Cable Hook449
  - 8-21-1 Manpower449
  - 8-21-2 Tools449
  - 8-21-3 Removal Procedure449
  - 8-21-4 Installation Procedure449
  - 8-21-5 Functional Check449
- Section 8-22 Replacement of Caster450
  - 8-22-1 Manpower450
  - 8-22-2 Tools450
  - 8-22-3 Removal Procedure450
  - 8-22-4 Installation Procedure452
  - 8-22-5 Functional Check452
- Section 8-23 Replacement of the COM Express453
  - 8-23-1 Manpower453
  - 8-23-2 Tools453
  - 8-23-3 Removal Procedure453
  - 8-23-4 Installation Procedure455
  - 8-23-5 Note on COM Express Replacement455
    - 8-23-5-1 Configuring BIOS455
  - 8-23-6 Note on EEPROM Replacement456
  - 8-23-7 Functional Check460
- Section 8-24 Replacement of the HDD/SSD461
  - 8-24-1 Manpower461
  - 8-24-2 Tools461
  - 8-24-3 Removal Procedure461
  - 8-24-4 Installation Procedure462
  - 8-24-5 Functional Check462
- Section 8-25 Replacement of Battery463
  - 8-25-1 Manpower463
  - 8-25-2 Tools463
  - 8-25-3 Removal Procedure463
  - 8-25-4 Installation Procedure464
  - 8-25-5 Functional Check464
- Section 8-26 Replacement of 4D465
  - 8-26-1 Manpower465
  - 8-26-2 Tools465
  - 8-26-3 Removal Procedure465
  - 8-26-4 Installation Procedure466
  - 8-26-5 Functional Check466
- Section 8-27 Replacement of Wireless LAN467
  - 8-27-1 Manpower467
  - 8-27-2 Tools467
  - 8-27-3 Removal Procedure467
  - 8-27-4 Installation Procedure467
  - 8-27-5 Functional Check467
- Section 8-28 Replacement of the Harness Cable and OPIO Cable Assy468
  - 8-28-1 Manpower468
  - 8-28-2 Tools468
  - 8-28-3 Pre-Work468
  - 8-28-4 Removal Procedure (Harness Cable Assy)468
  - 8-28-5 Removal Procedure (OPIO Cable Assy)470
  - 8-28-6 Installation Procedure470
  - 8-28-7 Functional Check471
- Section 8-29 Replacement of Peripheral Cable Assy472
  - 8-29-1 DVD Cables472
  - 8-29-2 B/W Printer Cables475
- Section 8-30 Replacement of the Probe Holder479
  - 8-30-1 Manpower479
  - 8-30-2 Tools479
  - 8-30-3 Removal Procedure479
  - 8-30-4 Installation Procedure479
  - 8-30-5 Functional Check479
- Section 8-31 Replacement of the Cable Hook480
  - 8-31-1 Manpower480
  - 8-31-2 Tools480
  - 8-31-3 Removal Procedure480
  - 8-31-4 Installation Procedure480
  - 8-31-5 Functional Check480
- Section 8-32 Replacement of the OPIO Tray481
  - 8-32-1 Manpower481
  - 8-32-2 Tools481
  - 8-32-3 Removal Procedure481
  - 8-32-4 Installation Procedure481
  - 8-32-5 Functional Check481
- Section 8-33 Replacement of the Paper tray482
  - 8-33-1 Manpower482
  - 8-33-2 Tools482
  - 8-33-3 Removal Procedure482
  - 8-33-4 Installation Procedure482
  - 8-33-5 Functional Check482
- Section 8-34 Replacement of AC Cable Holder483
  - 8-34-1 Manpower483
  - 8-34-2 Tools483
  - 8-34-3 Removal Procedure483
  - 8-34-4 Installation Procedure483
  - 8-34-5 Functional Check483
- Section 8-35 Replacement of the BW printer484
  - 8-35-1 Manpower484
  - 8-35-2 Tools484
  - 8-35-3 Pre work484
  - 8-35-4 Removal Procedure484
  - 8-35-5 Installation Procedure485
  - 8-35-6 Functional Check485
- Section 8-36 Replacement of the Speaker486
  - 8-36-1 Manpower486
  - 8-36-2 Tools486
  - 8-36-3 Pre work486
  - 8-36-4 Removal Procedure486
  - 8-36-5 Installation489
  - 8-36-6 Functional Check489
- Section 8-37 Replacement of the Monitor Arm490
  - 8-37-1 Manpower490
  - 8-37-2 Tools490
  - 8-37-3 Removal Procedure490
  - 8-37-4 Installation Procedure490
  - 8-37-5 Functional Check490
- Section 8-38 Replacement of Front Fan Filter491
  - 8-38-1 Manpower491
  - 8-38-2 Tools491
  - 8-38-3 Removal Procedure491
  - 8-38-4 Installation Procedure491
  - 8-38-5 Functional Check491
- Section 8-39 Replacement of Bottom Fan Filter492
  - 8-39-1 Manpower492
  - 8-39-2 Tools492
  - 8-39-3 Removal Procedure492
  - 8-39-4 Installation Procedure492
  - 8-39-5 Functional Check492
- Section 8-40 Replacement of SW CD set (R1, R2, R2.5 only) and SW USB (R3 only)493
  - 8-40-1 Manpower493
  - 8-40-2 Tools493
  - 8-40-3 Removal Procedure493
  - 8-40-4 Installation Procedure493
  - 8-40-5 Functional Check493
- Section 8-41 Replacement of Drawer494
  - 8-41-1 Manpower494
  - 8-41-2 Tools494
  - 8-41-3 Removal Procedure494
  - 8-41-4 Installation Procedure495
  - 8-41-5 Functional Check495
- Section 8-42 Replacement of ECG496
  - 8-42-1 Manpower496
  - 8-42-2 Tools496
  - 8-42-3 Removal Procedure496
  - 8-42-4 Installation Procedure497
  - 8-42-5 Functional Check497
- Section 8-43 Replacement of DCWD ASSY498
  - 8-43-1 Manpower498
  - 8-43-2 Tools498
  - 8-43-3 Removal Procedure498
  - 8-43-4 Installation Procedure499
  - 8-43-5 Functional Check499
- Section 8-44 Replacement of MCWD ASSY500
  - 8-44-1 Manpower500
  - 8-44-2 Tools500
  - 8-44-3 Removal Procedure500
  - 8-44-4 Installation Procedure500
  - 8-44-5 Functional Check500
- Section 8-45 Replacement of battery pack for LP7-P9 R2 ext battery pack501
  - 8-45-1 Manpower501
  - 8-45-2 Tools501
  - 8-45-3 Removal Procedure501
  - 8-45-4 Installation Procedure504
  - 8-45-5 Functional Check504
- Section 8-46 Replacement of battery pack for LP7-P9 R2 Battery option506
  - 8-46-1 Manpower506
  - 8-46-2 Tools506
  - 8-46-3 Removal Procedure506
  - 8-46-4 Installation Procedure508
  - 8-46-5 Functional Check509
- Section 8-47 Replacement of MBOB510
  - 8-47-1 Manpower510
  - 8-47-2 Tools510
  - 8-47-3 Removal Procedure510
  - 8-47-4 Installation Procedure514
  - 8-47-5 Functional Check514
- Section 8-48 Replacement of MIO-B515
  - 8-48-1 Manpower515
  - 8-48-2 Tools515
  - 8-48-3 Removal Procedure515
  - 8-48-4 Installation Procedure517
  - 8-48-5 Functional Check517
- Section 8-49 Replacement of BBC518
  - 8-49-1 Manpower518
  - 8-49-2 Tools518
  - 8-49-3 Removal Procedure518
  - 8-49-4 Installation Procedure523
  - 8-49-5 Functional Check523
- Section 8-50 Replacement of LOGIQ P9 ROTATION MODULE KIT524
  - 8-50-1 Manpower524
  - 8-50-2 Tools524
  - 8-50-3 Removal Procedure524
  - 8-50-4 Installation Procedure529
  - 8-50-5 Functional Check529
- Section 8-51 Replacement of ODD Dummy Cover R3530
  - 8-51-1 Manpower530
  - 8-51-2 Tools530
  - 8-51-3 Pre work530
  - 8-51-4 Removal Procedure530
  - 8-51-5 Installation Procedure530
  - 8-51-6 Functional Check530
- Section 8-52 Replacement of Probe Light assy531
  - 8-52-1 Manpower531
  - 8-52-2 Tools531
  - 8-52-3 Pre work531
  - 8-52-4 Removal Procedure531
Chapter 9533
Renewal Parts533
- Section 9-1 Overview533
  - 9-1-1 Purpose of Chapter 9533
- Section 9-2 List of Abbreviations534
- Section 9-3 LOGIQ P9/P7 Software535
- Section 9-4 Parts List Groups536
- Section 9-5 Plastics Covers (Front/Sides/Rear)538
  - 9-5-1 Plastics Covers (Front/Sides/Rear) (R1 ~ R2.5)538
  - 9-5-2 Plastics Covers (Front/Sides/Rear) (R3)540
- Section 9-6 LCD Monitor542
- Section 9-7 OPIO544
- Section 9-8 Nest Box Parts549
- Section 9-9 Mechanical Part553
- Section 9-10 Options556
- Section 9-11 Optional Peripherals and Accessories561
  - 9-11-1 Printers561
- Section 9-12 Probes562
- Section 9-13 Power Cord563
Chapter 10565
Care & Maintenance565
- Section 10-1 Overview565
  - 10-1-1 Preventive Maintenance Inspections565
  - 10-1-2 Purpose of Chapter 10565
- Section 10-2 Why do Maintenance566
  - 10-2-1 Quality Assurance566
- Section 10-3 Maintenance Task Schedule566
  - 10-3-1 How often should care & maintenance tasks be performed?566
- Section 10-4 Tools Required569
  - 10-4-1 Special Tools, Supplies and Equipment569
    - 10-4-1-1 Specific Requirements for Care & Maintenance569
- Section 10-5 System Maintenance570
- Section 10-6 System Software Updates(Software Download) (R1, R2, R2.5 only)576
  - 10-6-1 Software download and installation577
- Section 10-7 Using a Phantom585
- Section 10-8 Electrical Safety Tests585
- Section 10-9 When There’s Too Much Leakage Current...596
- Section 10-10 Ultrasound INSPECTION CERTIFICATE599

Brand	GE
Model	LOGIQ P7
Category	Medical Equipment
Language	English

GE LOGIQ P7 Service Manual

Table of Contents

Other manuals for GE LOGIQ P7

Questions and Answers:

GE LOGIQ P7 Specifications

Related product manuals