GE Sievers 900 Series - Page 162

GE Analytical Instruments ©2009 162 of 236 DLM 90488-01 Rev. A
Multi-Point Calibration Worksheet
Company Name___________________________ Date ________________________
Analyst Name ____________________________ Firmware Version _____________
Analyzer Serial Number ____________________
TOC Autozero Performed (Y/N): ______
(Line 1)
Reagent Flush Performed (Y/N): ______ (Line 2)
Enter data for the TC Calibration:
Expected Measured % Diff Adjusted
Blank N/A
________ ________ ________
1 ppm ________ ________ ________ ________
5 ppm ________ ________ ________ ________
10 ppm ________ ________ ________ ________
25 ppm ________ ________ ________ ________
50 ppm ________ ________ ________ ________
R
2
________
Enter data for the IC Calibration:
Expected Measured % Diff Adjusted
1 ppm ________ ________ ________ ________
5 ppm ________ ________ ________ ________
10 ppm ________ ________ ________ ________
25 ppm ________ ________ ________ ________
50 ppm ________ ________ ________ ________
R
2
________