0000010291 15
001
1.5 Safety devices
Emergency stop
Hit the Emergency stop (A) in case of an emer-
gency. All electrical power supply will be inter-
rupted immediately.
Cover guards Access to the process areas within the machine is prohibited.
Signs on the
machine
The signs on the machine are part of the safety provisions. They must not be cov-
ered over or removed, and must be present and legible during the entire life of the
machine.
– Check this regularly;
– Replace or repair signs that have become illegible or damaged.
Password To get access to a level of the system, personnel must enter a password. Chang-
ing a password is reserved to local service engineers and to the GEA service en-
gineer (level 5).
A
To Next Page
Loading...