16 0000010291
001
1.6 Safety precautions
During normal
production
The machine must only be operated when the cover(s) is (are) closed.
– Be sure that there is nobody in its immediate vicinity;
– Make sure that the environment around the machine is dry, clean and lit suffi-
ciently well;
– Keep away from moving parts.
Raise the hopper
Warning!
Always place a support block when the hopper is raised. This is necessary
to prevent crushed fingers due to unintended or accidental lowering.
During mainte-
nance and re-
pair
Warning!
Switch off and lock the main switch before inspection and maintenance
work.
Wait at least two minutes after switching off before carrying out repair work on
electrical components.
To Next Page
Loading...