0000010291 67
001
2000 hours
6000 hours
Augers Damage Repair or replace 6.2.10
Drive unit Repair or replace 6.2.11
Knockout mecha-
nism
Wear Replace 6.2.4 /
6.2.5
Inspection Check Action See
Inspection Check Action See
Hydraulic oil analysis Contamination
Oil purity classifica-
tion:
NAS 1638: 9
ISO 4406: 18 / 15
Replace -
Conveyor rolls Wear Replace -
Auger bearings Wear Replace 6.2.12
Preventative Action See
Hydraulic cylinders Replace 6.2.7
Hydraulic oil filters Replace -
Knockout cylinders Replace 6.2.6
Press block guiding
seals
Replace 6.2.8
Electronic / hydraulic
system
Calibrate 6.2.13
Inspection Check Action See
Hydraulic oil tank Contamination Remove sludge -
Frame and cowling Alignment
Weldings
Damage
Repair or replace
Hopper lift mecha-
nism
Functioning Repair or replace 6.2.15
Preventative Action See
Top plate Replace 4.3.2
Knockout mecha-
nism
Replace 6.2.5
To Next Page
Loading...