page | 96
Creating Macros
Using the GAVA Wizard
Adding a Page ip
The Page ip provides a method to automatically switch to the desired page of a device,
once the macro is executed. We’ve already created a “All Power OFF” and “All Power ON”
macro. As an example, we will add a Page ip to the “All Power ON” macro. Once this
macro is executed, the Inputs page of the A/V Receiver device will be displayed.
1. Click the ▲ button next to the Add command button.
2. Select pageip from the list.
3. Select the desired Room from under the Device column. For this example, we will
select Living Room.
4. Under the Command column, select A/V Receiver.
5. Finally, under the Value column, select Inputs.
To Next Page
Loading...