Gefen EXT-GAVA - Using the GAVA with a KNX Automation System

page | 160
Appendix
As with the Lutron RadioRA® 2 and HomeWorks® QS systems, it is important that the
KNX system be set up, congured, and functioning properly before attempting to add this
automation system to the GAVA.
1. Obtain the *.esf le from the KNX installer / electrician. The *.esf le is generated by
the KNX ETS software by using the “File > Extract Data” function.
2. Choose “Export Foreign Format”, and “Export to OPC Server”.
Using the GAVA with a KNX Automation System