EasyManua.ls Logo

Gefen EXT-GAVA - Installing more than One PACS; Mini PACS

Gefen EXT-GAVA
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installing more than one PACS / Mini PACS
If you will be installed more than one PACS in your system, rst you need to change the
IP address of the one that is connected to a different IP address that is not being used.
Log in to the rst PACS with your browser by entering “192.168.1.72” and change it IP
address, following the directions in the PACS User Manual. Then you can add the next
PACS.
1. Change the default IP address (192.168.1.72) of the last PACS that was
installed on the network.
2. Connect the next PACS to the network.
3. To connect additional PACS units, repeat steps 1 - 2. Refer to the PACS User
Manual for more information.
Normally, only one GAVA will be installed on a single network, as it can
communicate with multiple PACS and other IP-controlled devices. If there is a
reason why you require more than one GAVA on your network, you must change
the IP Address of the rst GAVA before adding another.
NOTE: For more information on setting the IP address on the GAVA,
see Setting the IP Address.
Installation
Getting Started
page | 9

Table of Contents

Related product manuals