GEFRAN-SIEI ARTDrive Vector V2 Series - Page 159

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 159
C19.01 DO 1 src N/A RWS Ipa3728 PList 1 PIN V-F-S-B Easy 4066
Ipa 3730 - [43] Spd is dly = Default
It allows to connect the selected signal to the Digital output 1.
ªª
ªª
ª
Pick List 1
C19.02 DO 2 src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Easy 4067
Ipa 4000 - NULL = Default
It allows to connect the selected signal to the Digital output 2.
ªª
ªª
ª
Pick List 1
C19.03 DO 3 src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Easy 4068
Ipa 4000 - NULL = Default
It allows to connect the selected signal to the Digital output 3.
ªª
ªª
ª
Pick List 1
C19.10 DO 0 inversion N/A RWS 0 0/1 DP V-F-S-B Easy 4060
[0] Not inverted
[1] Inverted
C19.11 DO 1 inversion N/A RWS 0 0/1 DP V-F-S-B Easy 4061
[0] Not inverted
[1] Inverted
C19.12 DO 2 inversion N/A RWS 0 0/1 DP V-F-S-B Easy 4062
[0] Not inverted
[1] Inverted
C19.13 DO 3 inversion N/A RWS 0 0/1 DP V-F-S-B Easy 4063
[0] Not inverted
[1] Inverted
C19.14 DO 3210 N/A RWS 0 0 - DP V-F-S-B Easy 4064
The digital output logical state is displayed under each number.