GEFRAN-SIEI ARTDrive Vector V2 Series - Page 160

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
Chapter 6 Parameter • 160 ARTDrive V2 series - Instruction Manual
C20.00
C20.00 Exp DO enable N/A RWS 0 0/1 DV V-F-S-B Full 3903
It enables the expanded digital outputs:
[0] Disabled
[1] Enabled
C21 INTERFACE / DO ExpCfg
See Digital outputs diagram and description above.
C21.00 DO 0X src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 4080
Ipa 4000 - NULL = Default
It allows to connect the selected signal to the Digital output 0X.
ªª
ªª
ª
Pick List 1
C21.01 DO 1X src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 4081
Ipa 4000 - NULL = Default
It allows to connect the selected signal to the Digital output 1X.
ªª
ªª
ª
Pick List 1
C21.02 DO 2X src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 4082
Ipa 4000 - NULL = Default
It allows to connect the selected signal to the Digital output 2X.
ªª
ªª
ª
Pick List 1
C21.03 DO 3X src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 4083
Ipa 4000 - NULL = Default
It allows to connect the selected signal to the Digital output 3X .
ªª
ªª
ª
Pick List 1
C21.04 DO 4X src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 4084
Ipa 4000 - NULL = Default
It allows to connect the selected signal to the Digital output 4X.
ªª
ªª
ª
Pick List 1